Posts Tagged ‘linux’


Recent experiences have shown me, that a lot of (free and open source) software (FLOSS) users are simply not aware that they could easily give back to their favorite application. It’s not a surprise that an average (Windows or Mac) user would not realise the possibilities, because she/he has been indoctrinated by proprietary software, that changing (or even looking at) software is bad (because it is forbidden by EULAs). But also full-blown IT professionals have difficulty grasping the full nature and power of FLOSS.

Now don’t stop reading if you are not an IT professional, because remember:

Everyone can help!

The possibility to give back is a big part of free software, so I would like to list all the ways to contribute, help and support. The most obvious one is writing code and contributing it to the software.  But I will try to explain them all. Especially the non-programming related ones.

Disclaimer: As you will notice, I’m a big fan of FLOSS, so this will be a biased article (meaning there will be a vibe against proprietary software). But whatever you views are on proprietary vs free software, this will help you understand the advantages of FLOSS a bit better and give you ideas on how to improve it.

Use it

(This section is a first update to the original version of this article)

If you don’t already have, start by using the software. The better you understand what the program can (and can’t) do, the easier it will be to contribute. This can also include related software, since FLOSS is very modular and every app depends on many more programs.

Mike Linksvayer goes even further:

[…] I argue that […] if one is a user, using more and becoming a better user is a valuable contribution independent of any other.

Contribute you time

Which means actively adding something to a piece of software. Any good application consists of more than lines of code. For example: without good support and documentation users will quickly be frustrated and switch to something other (or turn off their computer altogether). A professional software firm does not consist out of 100% programmes (I’d guess not even 50%), the same applies to FLOSS.

Community (a.k.a. Support)

Experience needed: none. Consumed time: a few minutes and any more you’re willing to invest.

The first thing you can do (and probably already have done) is to join the community in some way. At first you will do it to get some help yourself but as you continue to use any program you will be more experienced and without knowing it you will become an expert (at least in the eyes of someone who is completely new to it). Know you can help newbies, like other people helped you in the past (after all that is the purpose of a community).

You don’t have to help everyone, but once in a while when you feel, that you could really help someone with a specific problem just write him a few sentences and she/he will be very grateful.

You can join a community by subscribing to their mailing lists, registering to their forums, joining their IRC channels, contributing to their wiki (or related articles on Wikipedia itself). You can choose the method you are most comfortable with or use all.


Experience needed: some from a user point of view. Consumed time: any amount.

Documentation is very important (e.g. without a good users guide any piece of software is doomed). But software developers often have an aversion to write documentation or invest more time than absolutely necessary into them. So what you can do starts at fixing typos and misspellings and goes up to writing whole books about it (and selling them without restrictions).

Depending on the type of documentation (is it a small how-to or a whole book) and which software is used to write those, you may need some time to get acquainted with the corresponding method.


Experience needed: some from a user point of view and a little technical knowledge. Consumed time: tens of minutes up to hours.

Translating software consists of two parts:

  • Translating the application itself (the user interface): In most cases you will need some technical experience to carry this out, but there’re already some projects that have web-based interfaces to translate them, where you can instantly start your work.
  • Translating documentation:
    • Contribute to existing translations: see above.
    • Start a new translation: If you start a new translation you will have to take some responsibility to maintain it over a longer period of time. If you don’t have the time you can post that you are willing to work on it, but that you will need help (see Community).

Going from a single language program to a multilingual and multicultural piece of software is a major step for any FLOSS project. This step will enable it to compete with the proprietary world.

Beta test

Experience needed: none. Consumed time: some.

So let’s say your use-it-every-day-and-need-it-to-work application crashes, again and again! What now? What you can do (or have no other choice as to do with some closed source software) is to be irritated, restart your app and hope you didn’t lose too much work. You can try to find out where the problem is, but if you don’t have the source code and freedom to look at, you will be standing before a wall at some point. With FLOSS  there are no walls, and if you don’t understand want you are seeing, there are always people who do and are willing to help (see Community).

What I want so say, is that you can really beta test your app. If it crashes you can find out why and file a bug. Even if you don’t (know how to) find out why, you can file a bug (if you give enough information, so the developer can reproduce the problem!)


(This section is a second update to the original version of this article, thanks to Scott Anderson)

Experience needed: some. Consumed time: some.

Every project needs artwork. That can include everything from wallpapers, icon sets, fonts, etc up to whole themes and GUIs. Designing artwork and UIs requires some specific skills and experience, which the developer herself/himself may not have.


Experience needed: little up to professional programming skills. Consumed time: some to a lot.

Obviously you can add and improve the code. You can fork the source code and play with it. You can make changes for yourself and use them and if you feel like it you can share it with the world. You can even get paid for it: A lot of FLOSS developers are normally employed by software companies and are paid to work on what they love. You can also apply for internships with such companies. There is the Google Sommer of Code. And so on …


Experience needed: only the one you already have. Consumed time: any amount.

Besides the general purpose applications, there are specialised FLOSS projects for every profession. If you are part of that profession you can help improve those projects by giving advise (what is needed for this program to be used efficiently, is the science or theory which that program is based on correct/can it be improved, etc).

If you’re a lawyer, you can help them with legal problems (from general problems to software patent issues).

The list is endless.


Experience needed: none. Consumed time: minutes.

If someone invests their (personal) time in something, she/he always (well mostly) appreciates feedback and praise. So if you like something, thank the one who made it possible. Positive reinforcement is a great motivational factor.

See also: Thank a Dev Day


There is a lot of great FLOSS out there, but only a fraction of potential users know about it. So if you promote you favorite app, more people will use it, the (local) community grows and everyone’s happy.

Blogs & more

Write a blog entry about it. You can write about your experiences and motivations why you use it. You can write How-tos and Tutorials. You can write and enhance appropriate Wikipedia and other wiki articles. You can post a comparison/study of different programs (free and proprietary; it doesn’t matter if proprietary software is better, it will cost you more too).

Microblog about it (e.g. identi.ca and Twitter).


If you are in the position, promote them with classic advertisements (you should probably contact the project leader before doing that).


Sponsor the project somehow. Support them so the can be at events, conventions, summits, etc.


The last and most classic method to support something is to donate money or in special cases hardware (e.g. CD/DVD burning software devs need drives and empty disks), web space (e.g. mirrors) or other things. Check the homepage of your favorite project to see what donations they accept (most likely PayPal).


One thing I like to mention is Flattr:

Flattr is a social micropayment platform that lets you show love for the things you like.

Check out the introduction video on their homepage. Essentially you can donate small amounts of money to a lot of different projects. Flattr is in no way limited to FLOSS, you can support anything and anyone: Blogs, Music, Videos, …


Any feedback to this article is appreciated. Did I forget something? Did I get something wrong? Typos? Anything! No flame wars about good vs evil FLOSS vs. non-FLOSS please.

Flattr this Creative Commons License


Read Full Post »

As of late I became a big fan of correct typography. Which mostly means using the correct Unicode chars for everything. And the really awesome thing is that with Linux there is no need for “Insert special char” dialogs, since using the AltGr, the Shift or both keys you can get almost any character you will ever need.

Some examples (german keyboard layout):

  • AltGr+V/B/N for double quotation marks („ “ ”)
  • AltGr+Shift+V/B/N for single quotation marks (‚ ‘ ’)
  • AltGr+# (or AltGr+Shift+N) for apostrophes (’)
  • AltGr+. for ellipsis (…) which I use a lot
  • AltGr(+Shift)+- for En and Em dashes (– —)
  • and a lot more

I was very enthusiastic and tested every combination on my keyboard till I knew them all 🙂 I tried the same on an iBook (were everything was on other positions, but it was possible to get the same result) and on Windows XP (where are practically no special chars).

Directly typing those punctuation marks is quite nice, since I don’t have to rely on software to convert my input to the correct special chars (especially since there are some important differences between German and English typography).

Read Full Post »

Epson Perfection V300 Photo

I just bought the Epson Perfection V300 Photo … and it’s awesome! 100% Linux compatible.

Here’s what you need to do to get it working:

Gentoo Linux

Install media-gfx/iscan-plugin-gt-f720 and then start iscan and it works.

OpenSuSE Linux

Go to http://avasys.jp/eng/linux_driver/ and get the V300 RPM package. I had to install libltdl3 to make it work. Then start iscan and it works.

zypper install libltdl3
yast2 --install iscan-2.24.0-4.x86_64.rpm
yast2 --install esci-interpreter-gt-f720-0.0.1-2.x86_64.rpm

Again: Awesome!!!

If you want me to test the scanner on another Linux distro tell me, maybe I have time.

Read Full Post »

Netbook Part 4


Let me say first, that I hate GNOME! 🙂 But I like the UNR version. It has more a Smartphone (that works) feeling than a desktop PC feeling, but that’s fine by me. The preinstalled apps are simple and everything you need is there. Only the movie player sucks. Everything is very well integrated, so it is suitable for use on non-geek users.

But I installed KDE 4.2.2 too and after I changed the font size to 8 and 120DPI, its useable. But e.g. the Kopete “Add account” window is to big, so you can’t click on the Next button. Everything runs fluidly, even the compiz effects. Not as fast as GNOME but still.

Hibernation/Suspend seem to be working.


Here are some pics

Also one last note: All (USB) ports are on the side of the netbook. One USB port per side. Very practical. No ports are on the front- or backside.

Read Full Post »

Netbook Part 3

What else works (out of the box)

I tested the webcam with Cheese, the have-fun-with-your-webcam tool that is included in UNR. Taking snapshots works, but video capture doesn’t (not fluidly anyways). The card reader works (tested SDHC and Memorystick) and the earplugs jack works fine as well.

glxgears says my graphics card can do 145 FPS.

What doesn’t works

Voice recording doesn’t works out of the box, like the Ubuntu wiki says. Adding options snd-hda-intel model=basic to my ALSA config helped, but the voice recording app still doesn’t records anything. Didn’t try out more apps like Skype till now.

What I didn’t test

I didn’t test Bluetooth, since I have no other Bluetooth device 😉 Didn’t test the Mic jack, but I don’t think that works. Also didn’t test Modem and ExpressCard/34 Slot (whatever that is ..?).

If you want me to test something else, do tell me.

Read Full Post »

Netbook Part 2

Hardware support

All tests by the System Testing utility of Ubuntu worked. That means: Internet (WLAN over WPA), Networking, Keyboard & Mouse, Display resolution (1024×600), Sound and Video playback. The Display is correctly auto-detected and the quality of the display is really really great, considering it is only 9″.

Typing is a little weird, because the keys are a little small for my hands. Also the position of some keys is really stupid (Photo later). But very important: There is no windows key!!! Yeah! There is a Home-Key 🙂

Installing updates right now. Part 3 soon.

Read Full Post »

Netbook Part 1

I got my girl a netbook for her birthday and today it arrived. A brand-new Lenovo IdeaPad S9e: 1.6GHz, 1GB RAM, 160GB HDD, WLAN, Bluetooth, 4in1 Reader, Webcam, 1.1kg. Very pretty too.

Installing Linux

Regrettable it came with WinXP (kotz! [german for puke]) so I installed Ubuntu Netbook Remix (9.04). Copying the image with dd didn’t work at first, so I used unetbootin. Don’t know what that did, but after that, booting from USB drive worked fine. Installing Ubuntu was as easy as ever. Most time I spend setting up a useful partition table and deciding on it’s computer name.

No problems so far.

Part 2 soon.

Read Full Post »

Older Posts »